| MODELS |
F1612 |
F1330 |
F1832 |
F2630 |
F3220 |
F3232 |
| CUTTING AREA |
160 cm (63 in.) wide x 120 cm (47 in.) long; up to 50 m (164 ft.) long in multi panel |
129 cm (51 in.) wide x 305 cm (120 in.) long; up to 50 m (164 ft.) long in multi panel |
184 cm (72 in.) wide x 320 cm (126 in.) long; up to 50 m (164 ft.) long in multi panel |
265 cm (104 in.) wide x 305 cm (120 in.) long; up to 50 m (164 ft.) long in multi panel |
327 cm (128.7 in.) wide x 210 cm (82.6 in.) long; up to 50 m (164 ft.) long in multi panel |
327 cm (128.7 in.) wide x 320 cm (130.7 in.) long; up to 50 m (164 ft.) long in multi panel |
| MEDIA WIDTH |
Up to 165 cm (65 in.) |
Up to 134 cm (53 in.) |
Up to 190 cm (75 in.) |
Up to 270 cm (106.3 in.) |
Up to 332 cm (131 in.) |
Up to 332 cm (131 in.) |
| MULTI PANEL* |
5000 cm (1968 in.) *Media clamps and roll-feed and/or conveyor belt system are required |
| REPEATABILITY |
Within ± 0.05 mm on plots |
| ACCURACY |
0.05 % of move or 0.05 mm, whichever is greater |
| SPEED |
Up to 1000 mm/sec (39.4 in./sec) |
| ACCELERATION |
Up to 1 G |
| CLEARANCE* |
5 cm (2 in.) *Distance between vacuum table and Y-beam. Not taking into account the thickness of a cutting mat or conveyor belt |
| MAXIMUM ALLOWED FORCES |
Vertical: 200 Newton, Horizontal: 200 Newton |
| MAXIMUM TABLE LOAD |
50 kg/m² (10.2 lb/ft²) |
| CONNECTIVITY |
USB |
| POWER REQUIREMENTS |
3 Phase 208V+N or 3 Phase 230V or 3 Phase 400V+N |
| DIMENSIONS |
236 x 214 x 110 cm (92 x 76 x 43 in.) |
214 x 410 x 122 cm (84 x 161 x 48 in.) |
270 x 425 x 122 cm (106 x 167 x 48 in.) |
349 x 410 x 122 cm (137 x 161 x 48 in.) |
To be announced |
To be announced |
| WEIGHT |
500 kg (1100 lbs) |
1500 kg (3300 lbs) |
1680 kg (3700 lbs) |
1800 kg (3970 lbs) |
To be announced |
| OPERATING TEMPERATURE |
15˚ to 35˚C (59˚ to 95˚F) |
| STANDARD ACCESSORIES |
Drag Module, Conveyor System, Roll-Feed System, Safety Beam System, Pneumatic Pack, ADC right, standard 36˚ blade holder, 1 standard blade, 1 fiber-tip pen, hex screwdriver (4mm), hex screwdriver (2.5mm), USB cable (3 meter), USB extension cable (0.5 meter), media guide flanges (set of 2), Summa GoProduce software. |
| OPTIONAL ACCESSORIES |
Tangential Module, F Series Routing System, HF Routing System, HT Rotary module, Electronic Oscillating Tool, Pneumatic Oscillating Tool, Kiss Cutting Tool, Single Edge Cutout Tool, Double Edge Cutout Tool, Heavy Duty Cutout Tool, Creasing Tools, V-Cut Tools, production software; Automated Depth Control left (Upgrade Kit), basket (F1612), extension tables (F1612), wireless controller w/charger. |
