КАТЕРИ ЗА ФОЛИИ

Summa Cut D120

CUTTING TYPE Drag knife with TurboCut and Tangential Emulation Modes
TOOL COMPATIBILITY Blade, Pen, Pounce Tool
CUTTING WIDTH 120 cm (47 inch)
CUTTING SPEED up to 1131 mm/sec (44 ips) diagonal
AXIAL SPEED Up to 2 G
ALIGNMENT TYPE
  • OPOS X
  • Barcode job recognition
  • Up to 2 x 64 marks on the X-line
  • Y-Line compensation
MAXIMUM ACCELERATION Up to 3 G diagonal
TRACKING PERFORMANCE Within ± 0.1 mm (± 0.004 in.) on plots up to 8 m long (40 ft.); on rolls up to 760 mm wide
Within ± 0.1 mm (± 0.004 in.) on plots up to 4m long; on rolls over 760 mm wide
CUTTING FORCE 0-400 grams of down-force, in 5 gram increments
REPLOT MEMORY 4 MB (buffer size: 16 MB)
DISPLAY LANGUAGES English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian
CONNECTIVITY USB, Serial RS232 USB, Ethernet
POWER REQUIREMENTS 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS 160 (W) x 68 (D) x 112 (H) cm (63 (W) x 26.8 (D) x 44.1 (H) in.)
WEIGHT 42 kg (92 lbs)
OPERATING TEMPERATURE 15˚ to 35˚C (59˚ to 95˚F)
STANDARD ACCESSORIES WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades.
OPTIONAL ACCESSORIES

Summa S2 D120

CUTTING TYPE Drag knife with TurboCut and Tangential Emulation Modes
CUTTING WIDTHS 120 cm (47.2 inch), Extended Mode: material width
CUTTING SPEED up to 1414 mm (56 inches) per second diagonal
AXIAL ACCELERATION Up to 4 G
MAXIMUM ACCELERATION Up to 5.5 G diagonal
ALIGNMENT TYPE
  • OPOS X
  • Barcode job recognition
  • Up to 2 x 64 marks on the X-line
  • Y-Line compensation
TRACKING PERFORMANCE Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long
up to 4 m long on rolls over 760 mm wide
ACCURACY 0.2 % of movement or 0.25 mm, whichever is greater
CUTTING FORCE 0-400 grams of down-force, in 5 gram increments
DISPLAY LANGUAGE English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese
CONNECTIVITY USB; Ethernet
POWER REQUIREMENTS 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS 187 (W) x 68 (D) x 111 (H) cm (73.6 (W) x 26.8 (D) x 43.7 (H) in.)
SHIPPING WEIGHT 86 kg (189 lbs)
OPERATING TEMPERATURE 59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket.
OPTIONAL ACCESSORIES

Summa S2 T120

CUTTING TYPE True Tangential with Drag Knife Cutting Mode Capability
CUTTING WIDTHS 120 cm (47.2 inch), Extended Mode: material width
CUTTING SPEED up to 1414 mm (56 inches) per second diagonal
AXIAL ACCELERATION Up to 4 G
MAXIMUM ACCELERATION Up to 5.5 G diagonal
ALIGNMENT TYPE
  • OPOS X
  • Barcode job recognition
  • Up to 2 x 64 marks on the X-line
  • Y-Line compensation
TRACKING PERFORMANCE Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long
up to 4 m long on rolls over 760 mm wide
ACCURACY 0.2 % of movement or 0.25 mm, whichever is greater
CUTTING FORCE 0-600 grams of down-force, in 5 gram increments
DISPLAY LANGUAGE English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese
CONNECTIVITY USB; Ethernet
POWER REQUIREMENTS 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS 187 (W) x 68 (D) x 111 (H) cm 73.6 (W) x 26.8 (D) x 43.7 (H) in.
SHIPPING WEIGHT 86 kg (189 lbs)
OPERATING TEMPERATURE 59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket.
назад