КАТЕРИ ЗА ФОЛИИ

Почеток » Опрема » Катери » Катери за фолии » 140 cm

Summa Cut D140

CUTTING TYPE	Drag knife with TurboCut and Tangential Emulation Modes
TOOL COMPATIBILITY	Blade, Pen, Pounce Tool
CUTTING WIDTH	135 cm (53 inch)
CUTTING SPEED	up to 1131 mm/sec (44 ips) diagonal
AXIAL SPEED	Up to 2 G
ALIGNMENT TYPE	OPOS X Barcode job recognition Up to 2 x 64 marks on the X-line Y-Line compensation
MAXIMUM ACCELERATION	Up to 3 G diagonal
TRACKING PERFORMANCE	Within ± 0.1 mm (± 0.004 in.) on plots up to 8 m long (40 ft.); on rolls up to 760 mm wide Within ± 0.1 mm (± 0.004 in.) on plots up to 4m long; on rolls over 760 mm wide
CUTTING FORCE	0-400 grams of down-force, in 5 gram increments
REPLOT MEMORY	4 MB (buffer size: 16 MB)
DISPLAY LANGUAGES	English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian
CONNECTIVITY	USB, Serial RS232	USB, Ethernet
POWER REQUIREMENTS	100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS	175 (W) x 68 (D) x 114.5 (H) cm (68.9 (W) x 26.8 (D) x 45.1 (H) in.)
WEIGHT	48 kg (106 lbs)
OPERATING TEMPERATURE	15˚ to 35˚C (59˚ to 95˚F)
STANDARD ACCESSORIES	WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades.

Summa Cut D140FX

CUTTING TYPE	Drag knife with TurboCut and Tangential Emulation Modes
TOOL COMPATIBILITY	Blade, Pen, Pounce Tool
CUTTING WIDTH	132.3 cm (52.1 inch)
CUTTING SPEED	up to 1131 mm/sec (44 ips) diagonal
AXIAL SPEED	Up to 2 G
ALIGNMENT TYPE	OPOS X Barcode job recognition Up to 2 x 64 marks on the X-line Y-Line compensation
MAXIMUM ACCELERATION	Up to 3 G diagonal
TRACKING PERFORMANCE	Within ± 0.1 mm (± 0.004 in.) on plots up to 8 m long (40 ft.); on rolls up to 760 mm wide Within ± 0.1 mm (± 0.004 in.) on plots up to 4m long; on rolls over 760 mm wide
CUTTING FORCE	0-400 grams of down-force, in 5 gram increments
REPLOT MEMORY	4 MB (buffer size: 16 MB)
DISPLAY LANGUAGES	English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian
CONNECTIVITY	USB, Serial RS232	USB, Ethernet
POWER REQUIREMENTS	100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS	175 (W) x 68 (D) x 114.5 (H) cm (68.9 (W) x 26.8 (D) x 45.1 (H) in.)
WEIGHT	48 kg (106 lbs)
OPERATING TEMPERATURE	15˚ to 35˚C (59˚ to 95˚F)
STANDARD ACCESSORIES	WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades.
OPTIONAL ACCESSORIES	Basket for SummaCut D140FX

Summa S2 D140

CUTTING TYPE	Drag knife with TurboCut and Tangential Emulation Modes
CUTTING WIDTHS	135 cm (53.1 inch), Extended Mode: material width
CUTTING SPEED	up to 1414 mm (56 inches) per second diagonal
AXIAL ACCELERATION	Up to 4 G
MAXIMUM ACCELERATION	Up to 5.5 G diagonal
ALIGNMENT TYPE	OPOS X Barcode job recognition Up to 2 x 64 marks on the X-line Y-Line compensation
TRACKING PERFORMANCE	Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide
ACCURACY	0.2 % of movement or 0.25 mm, whichever is greater
CUTTING FORCE	0-400 grams of down-force, in 5 gram increments
DISPLAY LANGUAGE	English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese
CONNECTIVITY	USB; Ethernet
POWER REQUIREMENTS	100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS	202 (W) x 68 (D) x 111 (H) cm (79.6 (W) x 26.8 (D) x 43.7 (H) in.)
SHIPPING WEIGHT	90 kg (198 lbs)
OPERATING TEMPERATURE	59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES	WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket.
OPTIONAL ACCESSORIES	Roll-up system for Summa S Class 2 140

Summa S2 T140

CUTTING TYPE	True Tangential with Drag Knife Cutting Mode Capability
CUTTING WIDTHS	135 cm (53.1 inch), Extended Mode: material width
CUTTING SPEED	up to 1414 mm (56 inches) per second diagonal
AXIAL ACCELERATION	Up to 4 G
MAXIMUM ACCELERATION	Up to 5.5 G diagonal
ALIGNMENT TYPE	OPOS X Barcode job recognition Up to 2 x 64 marks on the X-line Y-Line compensation
TRACKING PERFORMANCE	Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide
ACCURACY	0.2 % of movement or 0.25 mm, whichever is greater
CUTTING FORCE	0-600 grams of down-force, in 5 gram increments
DISPLAY LANGUAGE	English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese
CONNECTIVITY	USB; Ethernet
POWER REQUIREMENTS	100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS	225 (W) x 68 (D) x 111 (H) cm 73.6 (W) x 26.8 (D) x 43.7 (H) in.
SHIPPING WEIGHT	90 kg (198 lbs)
OPERATING TEMPERATURE	59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES	WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket.
OPTIONAL ACCESSORIES	Roll-up system for Summa S Class 2 140

Roland CAMM1 GR-540

Mechanism / Driving method	Media-movement method / Digital control servo motor
Acceptable media widths	Max. 60 in (1,548 mm) Min. 6 in. (156 mm)
Maximum cutting area	Width: 55 in. (1,397 mm) Length: 984 in. (25 m)
Maximum cutting speed	1,485 mm/s (High speed mode – 45° direction)
Maximum cutting media thickness:	Up to .04 in (1mm)
Cutting speed / Cutting force	10 – 1,050 mm/s (in increments of 10 mm/s)/ 20 – 600 gf (in increments of 10 gf)
Mechanical resolution	0.005 mm/step
Software resolution	0.025 mm/step
Distance accuracy	Error of no more than +/-0.2% of distance traveled, or 0.1 mm (0.00394 In,), whichever is greater
Repetition accuracy 1 2	0.1 mm or less
Interface	Ethernet 10BASE-T / 100BASE-TX (auto-negotiation), USB 2.0 (full speed)
Buffer size	8MB (2MB for re-plot buffer)
Power supply / Consumption	AC 100 – 240 V 50/60 Hz 0.7 A/Approx. 70 W
During operation	67 dB (A) or less (according to 1507779)
During standby	43 dB (A) or less (according to 1507779)
Dimensions with stand	75.2 in. (W) x 29.1 in. (D) x 46.8 in. (H) 1,910 mm (W) x 740 mm (D) x 1,190 mm (H)
Weight with stand	191.8 lbs. (87 kg)
Packaging dimensions	80.7 in. (W) x 22.2 in. (D) x 30.3 in. (H) 2,050 mm (W) x 565 mm (D) x 770 mm (H)
Packaging weight	260 lbs. (118 kg)
Operating environment	Temperature: 5 to 40 °c (41 to 104 °F), Humidity: 35 to 80% (no condensation)
Included items	Power cord, electrical plug adopter, blade (ZEC-U5032, 1pc), blade holder (XD-CH4-BL), cable clamp, replacement blades for separating knife, installation guide, USB cable (2 m), alignment tool, Roland DG software (to download), user’s manual (to download)