КАТЕРИ ЗА ФОЛИИ

Почеток » Опрема » Катери » Катери за фолии » 160 cm

Summa Cut D160

CUTTING TYPE	Drag knife with TurboCut and Tangential Emulation Modes
TOOL COMPATIBILITY	Blade, Pen, Pounce Tool
CUTTING WIDTH	158 cm (62 inch)
CUTTING SPEED	up to 1131 mm/sec (44 ips) diagonal
AXIAL SPEED	Up to 2 G
ALIGNMENT TYPE	OPOS X Barcode job recognition Up to 2 x 64 marks on the X-line Y-Line compensation
MAXIMUM ACCELERATION	Up to 3 G diagonal
TRACKING PERFORMANCE	Within ± 0.1 mm (± 0.004 in.) on plots up to 8 m long (40 ft.); on rolls up to 760 mm wide Within ± 0.1 mm (± 0.004 in.) on plots up to 4m long; on rolls over 760 mm wide
CUTTING FORCE	0-400 grams of down-force, in 5 gram increments
REPLOT MEMORY	4 MB (buffer size: 16 MB)
DISPLAY LANGUAGES	English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian
CONNECTIVITY	USB, Serial RS232	USB, Ethernet
POWER REQUIREMENTS	100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS	198 (W) x 68 (D) x 114.5 (H) cm (77.9 (W) x 26.8 (D) x 45.1 (H) in.)
WEIGHT	54 kg (119 lbs)
OPERATING TEMPERATURE	15˚ to 35˚C (59˚ to 95˚F)
STANDARD ACCESSORIES	WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades.

Summa S2 D160

CUTTING TYPE	Drag knife with TurboCut and Tangential Emulation Modes
CUTTING WIDTHS	158 cm (62.2 inch), Extended Mode: material width
CUTTING SPEED	up to 1414 mm (56 inches) per second diagonal
AXIAL ACCELERATION	Up to 4 G
MAXIMUM ACCELERATION	Up to 5.5 G diagonal
ALIGNMENT TYPE	OPOS X Barcode job recognition Up to 2 x 64 marks on the X-line Y-Line compensation
TRACKING PERFORMANCE	Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide
ACCURACY	0.2 % of movement or 0.25 mm, whichever is greater
CUTTING FORCE	0-400 grams of down-force, in 5 gram increments
DISPLAY LANGUAGE	English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese
CONNECTIVITY	USB; Ethernet
POWER REQUIREMENTS	100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS	225 (W) x 68 (D) x 111 (H) cm (88.6 (W) x 26.8 (D) x 43.7 (H) in.)
SHIPPING WEIGHT	114 kg (251 lbs)
OPERATING TEMPERATURE	59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES	WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket.
OPTIONAL ACCESSORIES	Roll-up system for Summa S Class 2 160

Summa S2 T160

CUTTING TYPE	True Tangential with Drag Knife Cutting Mode Capability
CUTTING WIDTHS	158 cm (62.2 inch), Extended Mode: material width
CUTTING SPEED	up to 1414 mm (56 inches) per second diagonal
AXIAL ACCELERATION	Up to 4 G
MAXIMUM ACCELERATION	Up to 5.5 G diagonal
ALIGNMENT TYPE	OPOS X Barcode job recognition Up to 2 x 64 marks on the X-line Y-Line compensation
TRACKING PERFORMANCE	Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide
ACCURACY	0.2 % of movement or 0.25 mm, whichever is greater
CUTTING FORCE	0-600 grams of down-force, in 5 gram increments
DISPLAY LANGUAGE	English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese
CONNECTIVITY	USB; Ethernet
POWER REQUIREMENTS	100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS	225 (W) x 68 (D) x 111 (H) cm 88.6 (W) x 26.8 (D) x 43.7 (H) in.
SHIPPING WEIGHT	114 kg (251 lbs)
OPERATING TEMPERATURE	59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES	WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket.
OPTIONAL ACCESSORIES	Roll-up system for Summa S Class 2 160

Summa S2 TC160

CUTTING TYPE	True Tangential with OPOS CAM and Drag Knife Cutting Mode Capability
CUTTING WIDTHS	158 cm (62.2 inch), Extended Mode: material width
CUTTING SPEED	up to 1414 mm (56 inches) per second diagonal
AXIAL ACCELERATION	Up to 4 G
MAXIMUM ACCELERATION	Up to 5.5 G diagonal
ALIGNMENT TYPE	OPOS CAM Barcode job recognition Up to 2 x 64 marks on the X-line Y-Line compensation
TRACKING PERFORMANCE	Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide
ACCURACY	0.2 % of movement or 0.25 mm, whichever is greater
CUTTING FORCE	0-600 grams of down-force, in 5 gram increments
DISPLAY LANGUAGE	English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese
CONNECTIVITY	USB; Ethernet
POWER REQUIREMENTS	100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS	225 (W) x 68 (D) x 111 (H) cm (88.6 (W) x 26.8 (D) x 43.7 (H) in.)
WEIGHT	114 kg (251 lbs)
OPERATING TEMPERATURE	59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES	WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket.
OPERATIONAL ACCESSORIES	Roll-up system for Summa S Class 2 160

Roland CAMM1 GR-640

Mechanism / Driving method	Media-movement method / Digital control servo motor
Acceptable media widths	Max. 70 in. (1,802 mm) Min. 6 in. (156 mm)
Maximum cutting area	Width: 65 in. (1,651 mm) Length: 984 in. (25 m)
Maximum cutting speed	1,485 mm/s (High speed mode – 45° direction)
Maximum cutting media thickness:	Up to .04 in (1mm)
Cutting speed / Cutting force	10 – 1,050 mm/s (in increments of 10 mm/s)/ 20 – 600 gf (in increments of 10 gf)
Mechanical resolution	0.005 mm/step
Software resolution	0.025 mm/step
Distance accuracy	Error of no more than +/-0.2% of distance traveled, or 0.1 mm (0.00394 In,), whichever is greater
Repetition accuracy 1 2	0.1 mm or less
Interface	Ethernet 10BASE-T / 100BASE-TX (auto-negotiation), USB 2.0 (full speed)
Buffer size	8MB (2MB for re-plot buffer)
Power supply / Consumption	AC 100 – 240 V 50/60 Hz 0.7 A/Approx. 70 W
During operation	67 dB (A) or less (according to 1507779)
During standby	43 dB (A) or less (according to 1507779)
Dimensions with stand	85.2 in. (W) x 29.1 in. (D) x 46.8 in. (H) 2,165 mm (W) x 740 mm (D) x 1,190 mm (H)
Weight with stand	206.1 lb. (93.5 kg)
Packaging dimensions	90.5 in. (W) x 22.2 in. (D) x 30.3 in. (H) 2,300 mm (W} x 565 mm (D) x 770 mm (H)
Packaging weight	282 lbs. (128 kg)
Operating environment	Temperature: 5 to 40 °c (41 to 104 °F), Humidity: 35 to 80% (no condensation)
Included items	Power cord, electrical plug adopter, blade (ZEC-U5032, 1pc), blade holder (XD-CH4-BL), cable clamp, replacement blades for separating knife, installation guide, USB cable (2 m), alignment tool, Roland DG software (to download), user’s manual (to download)