КАТЕРИ ЗА ФОЛИИ
Почеток » Опрема » Катери » Катери за фолии »
Summa Cut D60
| CUTTING TYPE | Drag knife with TurboCut and Tangential Emulation Modes | |||
| TOOL COMPATIBILITY | Blade, Pen, Pounce Tool | |||
| CUTTING WIDTH | 60 cm (23 inch) | |||
| CUTTING SPEED | up to 1131 mm/sec (44 ips) diagonal | |||
| AXIAL SPEED | Up to 2 G | |||
| ALIGNMENT TYPE |
|
|||
| MAXIMUM ACCELERATION | Up to 3 G diagonal | |||
| TRACKING PERFORMANCE | Within ± 0.1 mm (± 0.004 in.) on plots up to 8 m long (40 ft.); on rolls up to 760 mm wide Within ± 0.1 mm (± 0.004 in.) on plots up to 4m long; on rolls over 760 mm wide |
|||
| CUTTING FORCE | 0-400 grams of down-force, in 5 gram increments | |||
| REPLOT MEMORY | 4 MB (buffer size: 16 MB) | |||
| DISPLAY LANGUAGES | English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian | |||
| CONNECTIVITY | USB, Serial RS232 | USB, Ethernet | ||
| POWER REQUIREMENTS | 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum | |||
| DIMENSIONS | 100 (W) x 35 (D) x 30 (H) cm (39.4 (W) x 13.8 (D) x 11.8 (H) in.) | |||
| WEIGHT | 15 kg (33 lbs) | |||
| OPERATING TEMPERATURE | 15˚ to 35˚C (59˚ to 95˚F) | |||
| STANDARD ACCESSORIES | WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades. | |||
| OPTIONAL ACCESSORIES | Stand or Stand and Basket for SummaCut D60 | |||
Summa S2 D75
| CUTTING TYPE | Drag knife with TurboCut and Tangential Emulation Modes | |||
| CUTTING WIDTHS | 74.2 cm (29.2 inch), Extended Mode: material width | |||
| CUTTING SPEED | up to 1414 mm (56 inches) per second diagonal | |||
| AXIAL ACCELERATION | Up to 4 G | |||
| MAXIMUM ACCELERATION | Up to 5.5 G diagonal | |||
| ALIGNMENT TYPE |
|
|||
| TRACKING PERFORMANCE | Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide |
|||
| ACCURACY | 0.2 % of movement or 0.25 mm, whichever is greater | |||
| CUTTING FORCE | 0-400 grams of down-force, in 5 gram increments | |||
| DISPLAY LANGUAGE | English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese | |||
| CONNECTIVITY | USB; Ethernet | |||
| POWER REQUIREMENTS | 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum | |||
| DIMENSIONS | 141 (W) x 68 (D) x 111 (H) cm (55.5 (W) x 26.8 (D) x 43.7 (H) in.) | |||
| SHIPPING WEIGHT | 69 kg (152 lbs) | |||
| OPERATING TEMPERATURE | 59˚ to 95˚F (15˚ to 35˚C) | |||
| STANDARD ACCESSORIES | WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket. | |||
| OPTIONAL ACCESSORIES | ||||
Summa S2 T75
| CUTTING TYPE | True Tangential with Drag Knife Cutting Mode Capability | |||
| CUTTING WIDTHS | 74.2 cm (29.2 inch), Extended Mode: material width | |||
| CUTTING SPEED | up to 1414 mm (56 inches) per second diagonal | |||
| AXIAL ACCELERATION | Up to 4 G | |||
| MAXIMUM ACCELERATION | Up to 5.5 G diagonal | |||
| ALIGNMENT TYPE |
|
|||
| TRACKING PERFORMANCE | Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide |
|||
| ACCURACY | 0.2 % of movement or 0.25 mm, whichever is greater | |||
| CUTTING FORCE | 0-600 grams of down-force, in 5 gram increments | |||
| DISPLAY LANGUAGE | English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese | |||
| CONNECTIVITY | USB; Ethernet | |||
| POWER REQUIREMENTS | 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum | |||
| DIMENSIONS | 141 (W) x 68 (D) x 111 (H) cm 55.5 (W) x 26.8 (D) x 43.7 (H) in. | |||
| SHIPPING WEIGHT | 69 kg (152 lbs) | |||
| OPERATING TEMPERATURE | 59˚ to 95˚F (15˚ to 35˚C) | |||
| STANDARD ACCESSORIES | WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket. | |||
| OPTIONAL ACCESSORIES | ||||
Summa S2 TC75
| CUTTING TYPE | True Tangential with OPOS CAM and Drag Knife Cutting Mode Capability | ||
| CUTTING WIDTHS | 76 cm (30 inch), Extended Mode: material width | ||
| CUTTING SPEED | up to 1414 mm (56 inches) per second diagonal | ||
| AXIAL ACCELERATION | Up to 4 G | ||
| MAXIMUM ACCELERATION | Up to 5.5 G diagonal | ||
| ALIGNMENT TYPE |
|
||
| TRACKING PERFORMANCE | Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide |
||
| ACCURACY | 0.2 % of movement or 0.25 mm, whichever is greater | ||
| CUTTING FORCE | 0-600 grams of down-force, in 5 gram increments | ||
| DISPLAY LANGUAGE | English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese | ||
| CONNECTIVITY | USB; Ethernet | ||
| POWER REQUIREMENTS | 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum | ||
| DIMENSIONS | 141 (W) x 68 (D) x 111 (H) cm (55.5 (W) x 26.8 (D) x 43.7 (H) in.) | ||
| WEIGHT | 69 kg (152 lbs) | ||
| OPERATING TEMPERATURE | 59˚ to 95˚F (15˚ to 35˚C) | ||
| STANDARD ACCESSORIES | WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket. | ||
| OPERATIONAL ACCESSORIES | |||
Roland CAMM-1 GS-24
| Driving method | Digital control servo motor |
| Cutting method | Media-moving method |
| Loadable material width | 2 to 27-1/2 in. (50 to 700 mm) |
| Maximum cutting area | Width: 22.9 in (584 mm)
Length: 984.25 in (25000 mm) |
| Acceptable tool | Special blade for CAMM-1 series |
| Maximum cutting speed | 19.69 in/s (500 mm/s) (all directions) |
| Maximum cutting media thickness | Up to .04 in (1 mm) |
| Cutting speed | .4 in to 19.69 in/s (10 to 500 mm/sec) (all directions) |
| Blade force | 30 – 350 gf |
| Mechanical resolution | 0.000492 in./step (0.0125 mm/step) |
| Software resolution | 0.000984 in./step (0.025 mm/step) |
| Distance accuracy(1) | Error of less than ±0.2 % of distance traveled, or ±0.1 mm, whichever is greater |
| Repetition accuracy (1)(2) | ±0.1 mm or less |
| Alignment accuracy for printing and cutting when loading printed material (1) (3) | ±1 mm or less for movement distance of 210 mm or less in material-feed direction and movement distance of 170 mm or less in width direction (Excluding effects of printer and/or material) |
| Interface | USB interface (compliant with Universal Serial Bus Specification Revision 2.0 Full Speed, Connecting Multiple Units) |
| Re-plot memory | 2MB |
| Instruction system | CAMM-GL III |
| Power supply | Dedicated AC adapter |
| Input: | AC 100 to 240 V ±10 % 50/60 Hz 1.7 A |
| Output: | DC 24 V, 2.8 A |
| Power consumption | Approx. 30 W (including AC adapter) |
| Acoustic noise level during operation | 70 dB (A) or less (according to ISO 7779) |
| Acoustic noise level during standby | 40 dB (A) or less (according to ISO 7779) |
| Dimensions | 33.5 in (W) × 12.2 (D) × 9.17 (H) [851 (W) x 310 (D) x 235 (H) mm]With stand 33.5 in (W) X 12.2 (D) X 40.75 (H) [851(W) X 310 (D) X 1035 mm (H)] |
| Weight | 29.77 lbs. [13.5 kg]
With stand 58 lb. [26 kg] |
| Packaging size | 38 (W) x 17.7 (D) x 15.3 (H) in.
[975 (W) x 450 (D) x 390 (H) mm] |
| Packaging weight | 39.7 lb. (18 kg) |
| Environment | Temperature: 5 to 40°C (41 to 104°F), humidity: 35 to 80 % (no condensation) |
| Included items | AC adapter, power cord, blade, blade holder, roller base, alignment tool, USB cable, Set Up guide |