Summa Series 2 D75/D120/D140/D160
Electric heat swinger press with double plate and lateral move.Long lasting strong construction and a good pressure. No compressed air needed.Half-automatic closing and automatic opening. Electronic and digital touch screen with visual control of temperature,pressure and time with advice of eventual errors. Exchangeable under plate. Possibility to have the cap accessory as extra option. Piece counter, Nomex-cover.
Model 5S : Closing using the side buttons / Automatic opening Model 5SA: Closing / opening Automatic (without possibility of hats accessory)
Send request
Categories: Vinyl Cutter
Drag Cutting Head
Designed specifically for high-volume cutting environments, Summa’s D Series unites power and precision with an efficient and affordable high-speed drag knife cutting head. The D Series is a do-it-all dynamo with the resilience to perform day in and day out.
| Model | S2 D75 | S2 D120 | S2 D140 | S2 D160 |
| CUTTING TYPE | Drag knife with TurboCut and Tangential Emulation Modes | |||
| CUTTING WIDTHS | 74.2 cm (29.2 inch), Extended Mode: material width | 120 cm (47.2 inch), Extended Mode: material width | 135 cm (53.1 inch), Extended Mode: material width | 158 cm (62.2 inch), Extended Mode: material width |
| CUTTING SPEED | All S Class 2 models cut at speeds up to 1414 mm (56 inches) per second diagonal | |||
| AXIAL ACCELERATION | Up to 4 G | |||
| MAXIMUM ACCELERATION | Up to 5.5 G diagonal | |||
| ALIGNMENT TYPE | · OPOS X
· Barcode job recognition · Up to 2 x 64 marks on the X-line · Y-Line compensation |
|||
| TRACKING PERFORMANCE | Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide | |||
| ACCURACY | 0.2 % of movement or 0.25 mm, whichever is greater | |||
| CUTTING FORCE | 0-400 grams of down-force, in 5 gram increments | |||
| DISPLAY LANGUAGE | English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese | |||
| CONNECTIVITY | USB; Ethernet | |||
| POWER REQUIREMENTS | 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum | |||
| DIMENSIONS | 141 (W) x 68 (D) x 111 (H) cm (55.5 (W) x 26.8 (D) x 43.7 (H) in.) | 187 (W) x 68 (D) x 111 (H) cm (73.6 (W) x 26.8 (D) x 43.7 (H) in.) | 202 (W) x 68 (D) x 111 (H) cm (79.6 (W) x 26.8 (D) x 43.7 (H) in.) | 225 (W) x 68 (D) x 111 (H) cm (88.6 (W) x 26.8 (D) x 43.7 (H) in.) |
| SHIPPING WEIGHT | 69 kg | 86 kg | 90 kg | 114 kg |
| OPERATING TEMPERATURE | 59˚ to 95˚F (15˚ to 35˚C) | |||
| STANDARD ACCESSORIES | WinPlot or MacSign Cut Software, CutterControl Parameter Software, CD w/ Manuals and Drivers, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket. | |||
| OPTIONAL ACCESSORIES | Roll-up system for Summa S Class 2 140 and Summa S Class 2 160 | |||