+389 70 370712 office@mirage-mk.com

Summa Series 2 D75/D120/D140/D160

Summa SC Series D60/D120/D140/D160

Where performance meets value
It’s no wonder why SummaCut is one of the most popular series of vinyl cutters ever built. By combining world renowned craftsmanship with real-world affordability, Summa managed to create a top-of-the-line cutter series that tops all other competitors.

Features:
Legendary Tracking
The large, easy-to-use control panel allows the operator to quickly change the speed, pressure, plot mode and other settings, perform test cuts, and much more.

Optical Positioning System
OPOS-X contour cutting alignment enables you to die-cut valuable printed vinyl graphics with complete confidence and ease.

High-speed Cutting Head
The newly designed high-speed cutting head features incredible accuracy for reliable and effortless vinyl cutting.

Intelligent Media System
Integrated media rollers and roll end flanges load vinyl straight and keep media on track, even when cutting at top speed.

Send request

    Categories: Vinyl Cutter

    Legendary Tracking
    The large, easy-to-use control panel allows the operator to quickly change the speed, pressure, plot mode and other settings, perform test cuts, and much more.

    Optical Positioning System
    OPOS-X contour cutting alignment enables you to die-cut valuable printed vinyl graphics with complete confidence and ease.

    High-speed Cutting Head
    The newly designed high-speed cutting head features incredible accuracy for reliable and effortless vinyl cutting.

    Intelligent Media System
    Integrated media rollers and roll end flanges load vinyl straight and keep media on track, even when cutting at top speed.

    Model D60 D120
    CUTTING TYPE Drag knife with TurboCut and Tangential Emulation Modes
    TOOL COMPATIBILITY Blade, Pen, Pounce Tool
    CUTTING WIDTHS 60 cm 120 cm
    CUTTING SPEED All SummaCut models cut at speeds up to 1131 mm/sec (44 ips) diagonal
    AXIAL ACCELERATION Up to 2 G
    MAXIMUM ACCELERATION Up to 3 G diagonal
    ALIGNMENT TYPE ·         OPOS X

    ·         Barcode job recognition

    ·         Up to 2 x 64 marks on the X-line

    ·         Y-Line compensation
    TRACKING PERFORMANCE Within ± 0.1 mm on plots up to 8 m long (40 ft.); on rolls up to 760 mm wide

    Within ± 0.1 mm on plots up to 4m long; on rolls over 760 mm wide
    CUTTING FORCE 0-400 grams of down-force, in 5 gram increments
    REPLOT MEMORY 4 MB (buffer size: 16 MB)
    DISPLAY LANGUAGE English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian
    CONNECTIVITY USB, Serial RS232, Ethernet (only on SummaCut D120, D140 – not FX – & D160)
    POWER REQUIREMENTS 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
    DIMENSIONS 100 (W) x 35 (D) x 30 (H) cm (39.4 (W) x 13.8 (D) x 11.8 (H) in.) 160 (W) x 68 (D) x 112 (H) cm (63 (W) x 26.8 (D) x 44.1 (H) in.)
    SHIPPING WEIGHT 15 kg 42 kg
    OPERATING TEMPERATURE 59˚ to 95˚F (15˚ to 35˚C)
    STANDARD ACCESSORIES WinPlot or MacSign Cut Software, CutterControl Parameter Software, CD w/ Manuals and Drivers, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), 1 Spare Fuse, Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades.
    OPTIONAL ACCESSORIES Stand or Stand and Basket for SummaCut D60

    назад